11 "Faux Pas" That Are Actually Okay To Use With Your Ghost 2 Immobiliser

· 6 min read
11 "Faux Pas" That Are Actually Okay To Use With Your Ghost 2 Immobiliser

Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The innovative Ghost immobiliser guards your precious car from relay theft and key-longs. With a personalised PIN sequence, unless you know the code your car won't start!

Transport Mode allows you to temporarily disable the device, which is great for servicing and transport in vehicles. It then reactivates by entering a pin code again.

No Key Fobs, or Led Indicators

The Ghost 2 immobiliser is a innovation in automotive security technology that provides a strong defense against the latest techniques of car theft. Its invisibility and engine start-blocking reduces the risk of theft, providing peace of mind as well as saving money on insurance.

It isn't detectable by scanners, and it cannot be hacked with common methods such as key cloning or signal jamming. The device utilizes buttons in your vehicle, such as those found on the steering wheel or door panels, to generate a unique PIN code that can be altered. The sequence can be as long as 20 presses. If the correct sequence is entered or in the event that the beacon or mobile app is employed, only the vehicle owner can start the engine, thereby providing an extra layer of protection against thieves.

You can also activate an easy service mode in cases such as valet parking or servicing, which requires you to temporarily disable your system. This can be done quickly and easily using an app on your mobile, ensuring that your vehicle is secure while being repaired. It is easy to revert to secure mode when the work is completed, ensuring your vehicle is fully protected at all times.

Unlike other aftermarket immobilisers that work with a fob and a fob, the Ghost 2 can be operated directly via the existing buttons, making it more user-friendly than conventional systems. The application can also be used as a backup key in the event of an emergency. This allows you to drive with your security shut off, without needing to enter a pin code.

No Radio Frequency Signals

In contrast to traditional security systems that have their own separate remote and remote, the Ghost 2 immobiliser doesn't require any additional key fobs and can be operated using the buttons on your steering wheel or the centre console. The device is unnoticeable by thieves who employ RFID scanning technology or code grabbing, which means your car won't start in the event that they take your key.

The device locks the engine using an exclusive sequence of buttons. This unique PIN code can be entered via the app or via the buttons on the steering wheel and centre console. This allows you to secure the gearbox as well which means that your car can't be taken away unless you have a key or capable of entering your pin code. The device can be set to Transport mode, which allows you to drive your car without entering the pin code, and also providing your vehicle with additional security when it's used for valet parking or service.

The Ghost 2 immobiliser is designed to serve as a deterrent for theft that is as subtle as it can be, making it a desirable alternative for those who have spent a lot of money on making their vehicles more unique or have expensive or rare vehicles. Many have stated that this is an excellent way to protect their cars from theft, with some even sharing stories of attempted thefts that were thwarted by the device.  immobiliser ghost  is also very versatile. Users have reported that it works with regular keys and with the emergency button on their vehicle, giving them security when they're not in their vehicle.

No Radio Frequency Scanners

Ghost immobilisers safeguard your vehicle against key copying and theft. The system uses the buttons on your dashboard and the steering wheel to create a unique sequence of buttons that only you know. Without this sequence, your car cannot start. The combination of a unique disarm sequence and the absence of radio frequency signals makes the device difficult to hack or bypass.

The Ghost CAN Immobiliser is a safer alternative to Thatcham approved devices that rely on radio frequency scanning. It works silently without external signals and doesn't depend on any external signals. It is a more secure alternative and is protected if installed by an approved installer of TASSA (we are one of them!) ).

Due to the nature and way in which the Ghost immobiliser is integrated into your vehicle, it is strongly advised to have an experienced installer perform the installation. This ensures that it's integrated seamlessly with the vehicle's systems, resulting in maximum performance and a substantially lower risk of failure.

Professional installation is often accompanied by warranties and support to increase the value of your purchase. This is a major protection against thieves who are less likely to try any attempt to bypass the device because of the security features and professional installation.


As well as being an effective deterrent to thieves, as well as a great deterrent to thieves, the Ghost is designed to be user-friendly as well. It can be programmed to automatically rearm for a set amount of time after parking your vehicle. This means you don't have to remember your PIN every time. It also allows the flexibility of Service/Valet Mode in the event that you have to hand your vehicle to a service or valet parking. This can be turned on or off depending on your preference. a simple indication sequence.

No Wire Cutting

The Ghost 2 does not require cutting any wires in your car to install, ensuring non-invasive integration with your vehicle's original systems. It connects to your vehicle's CAN data networks and is programmable with an unique PIN code. This will prevent anyone else from starting the engine if they don't have a specific sequence of PINs or an app authorization.

The device is also undetectable by the specialist scanning tools which some thieves employ and is silent as it doesn't emit radio signals like other immobilisers. It's weatherproof, sealed, and so small that it can be hidden anywhere in the vehicle making it near impossible to locate.

The Ghost II also has the capability to be switched into 'transport mode which allows it to be used for short durations without the need for a separate PIN. This is great for situations such as lending the car to someone in the family or a friend or in emergencies which allows you to get your car started and drive away quickly and safely.

It's important that you work in a well lit space when installing the Ghost II.  ghost car immobiliser  should also wear safety gear while working with electrical components and tools. A basic set of tools will help you to make precise connections. A multimeter will help check electrical values and ensure that your wiring is secure. Insulation tape and cable tie can be used to cover any wires that have been cut or exposed or to join them during installation.

It is essential to disconnect the vehicle's battery before beginning any wiring work. This will stop any airbag deployments by accident or electrical shocks from happening if the battery is disconnected when the Ghost II is still connected to the system of your vehicle.

Easy to Install

The Ghost immobiliser is an exclusive next generation device that works by connecting directly to the vehicle's CAN Data Network and using a personalised PIN Code to prevent your vehicle from starting. This makes it far harder to crack than traditional alarm systems or aftermarket key fobs and also provides greater security against key cloning hacking as well as relay attacks.

The unit can be concealed inside your vehicle. it uses the buttons on your steering wheel and dashboard to create a unique sequence that you can only recognize. This stops thieves from being able to use a cloned key to start the vehicle and can also stop them from using a diagnostic tool that is based on hacking into the OBD.

Installation is simple and does not require cutting wires. The unit connects to the vehicle's CAN bus system via a continuous 12V supply as well as a ground connection. A multimeter is required to determine the proper wires. Hand tools of a basic nature are sufficient for installation. To protect the connections from damage, insulation tape or heat shrink tubes are suggested. Cable ties can be used to keep the wiring tidy.

Once it is installed, the device is put into a learning mode that captures your specific sequence of buttons or sequences to create your unique pin code. The information is saved in the CAN network which makes it nearly impossible for anyone to duplicate your sequence and start your vehicle.

Transport Mode is a feature that can be utilized in the event of an emergency, such as if you forget your PIN code, sell your vehicle, or the button stops working. This will shut down the Ghost system completely but will reactivate automatically when you reach 31mph for over 15 minutes or you enter your PIN Code. This is ideal for those who regularly rent out their vehicles via services like Turo or ZipCar.