Ghost 2 Immobiliser Installation
The installation of the ghost 2 immobiliser is a quick and efficient way to secure your vehicle from theft. It connects directly to the CAN network of your vehicle and is virtually unnoticeable.
Locate a source of constant power and a point of grounding. The wires should be properly protected from electrical shorts.
Stops theft
The Ghost 2 Immobiliser utilizes an exclusive PIN code sequence that is created using the electronic buttons on your steering wheel and centre console to ensure that only you can start your car. This means that even if thieves are able to steal your keys or hack your car's systems, they won't be able to get your vehicle to move. It's also completely quiet and unnoticeable by anyone who attempts to test it So you can rest sure that no one will know that you've added an extra layer of security.
Another reason that it is so effective at preventing theft is its ability to stop your engine from running, even if a burglar has managed to get in. This is done by using a secondary device, called the Shadow. It is connected to the CAN network of your vehicle and doesn't communicate using radio frequency. This makes it difficult for thieves or others to locate. In addition to this, the Shadow can be linked to a tracking/paging system that will allow you to monitor your vehicle's movements. Additionally, it has an output which can be used to trigger a siren (if authorised) in the event of someone trying to steal your vehicle.
When working with wiring it is important to work in a space that is well-lit. This will enable you to identify the correct wires and avoid any accidental short circuits or disconnections. Making sure you double-check and test the connections is essential and so is insulation of the wiring to shield it from the elements. It is also recommended to use cable tie-ups to bundle and secure the wires, which will enhance their appearance and decrease the risk of them being dislodged during driving.
It is also a great idea to mark the CAN H and L wires with tape or labels. A misidentification of their position could trigger an electrical surge that could damage the immobiliser. It is also an excellent idea to test the identified power source and grounding location with a multimeter to make sure that they are providing a steady 12V supply and a solid grounding.
Easy to use
A ghost immobiliser will help keep your vehicle secure from theft. It stops key cloning, ECU swapping and other security risks, and it can be paired with an iPhone application for simple control and monitoring. website will alert you in the event that your vehicle is being manipulated. The app can also help locate your car in the event it is stolen.
The Ghost immobiliser is discrete and doesn't require any special equipment in order to function. It is connected to the CAN system of your vehicle, and is programmed with a unique PIN code. It can be activated with a set of buttons on your dashboard or steering wheel, or through the WeCar mobile app. The code has to be entered to start the engine, which means thieves aren't able to turn off your vehicle and leave.
Installing a Ghost immobiliser is a straightforward procedure. It's important to follow the directions to ensure that the systems of your vehicle are working smoothly. The first step is to disconnect the battery. This will prevent an accidental airbag deployment, and also ensure security. It is also essential to work in a place that is well-lit to avoid making mistakes and to make precise connections. It is also essential to employ the correct soldering techniques and high-quality connectors to ensure a secure and reliable connection.
The CAN H wire as well as the CAN L wiring are needed to connect your Ghost immobiliser to the wiring of your vehicle. Use a wiring diagram identify the wires. Then, find the best place to connect them. Mark these wires with tape or labels to aid in identifying them when installing.
Once connections have been made, it's a good idea to test the immobiliser to make sure that it's functioning correctly. It's also recommended to test the Transport Mode, which disables the Ghost system and allows you to temporarily disable your security features. This is especially useful in situations like transportation of vehicles or service. This feature is particularly beneficial for older vehicle that needs its battery to be isolated for service.
Low-profile
A ghost immobiliser can be used to prevent theft from vehicles with keyless entry. It works by capturing the signal from the original remote, and creating an obstruction that thieves can't penetrate without a valid PIN code. It's a secure and discrete method of protecting your vehicle, and insurance companies even recommend it to reduce the cost of your monthly cost of insurance. It's a low-profile and concealed system that can be found within your car's buttons. It doesn't feature LED indicators, making it virtually unnoticeable to thieves.
Contrary to other security systems, unlike other security systems, the Ghost immobiliser is connected to your vehicle's CAN data network instead of a key fob. It is secure and thieves are unable to disable it by cutting wires. This makes it difficult for thieves to take your car. It's also a great alternative for older vehicles that don't have a keyless entry system.
Installing a ghost immobiliser is easy if you have the right tools and materials. You'll require basic hand tools as well as a multimeter for checking the electrical value, and insulation tape or cable ties to ensure that your connections are secure and well-insulated. Before you start your engine, you should disconnect your battery and ensure that all wiring is securely tied. This will prevent thieves from tampering with the wiring.
If you're not confident in installing your own immobiliser then you can ask an auto shop near you to handle it for you. They will take care of the entire process beginning with the initial inspection through to the installation. If something goes wrong, they'll offer a warranty. They'll be capable of answering any questions you may have about the immobiliser, and assist you in deciding whether it's the right option for your vehicle.
The Autowatch Ghost 2 smart immobiliser is integrated directly into your car's electronic control unit. This helps to protect against hacking, key cloning and relay attacks that are common in modern vehicles. It's TASSA certified and provides top security against theft, so you can rest assured that your vehicle is safe when driving it.
TASSA verified
The Ghost immobiliser system is among the most effective ways to safeguard your car from theft. It connects to your car's CAN data network, and uses it to stop the engine from beginning without a unique PIN code. The system is undetectable by thieves, making it a great alternative to an alarm for your car. You can alter the PIN code at any time and only you'll know it, ensuring the security of your vehicle.
A TASSA verified installer will complete the installation of the Ghost system in a couple of hours at your home or at your place of work. They will also give you owner's guides, installation certificates and a free emergency card. They will also show the equipment to you and ensure that you are pleased with the service.
ghost immobiliser and tracker unlike other immobilisers, can connect directly to the CAN data network of your vehicle. It can be installed without needing to cut any wires. It's also quiet and is therefore difficult to be detected by thieves. The system comes with a unique and changeable PIN code that you enter by pressing buttons on the dashboard or wheel. This prevents anyone from starting your car even if they have your key fobs.
When you're ready for installing an immobiliser ghost 2 first, you must begin by disconnecting the battery. This will avoid any accidental airbag deployment or short circuits in the process. Once the battery has been disconnected it is recommended to follow the directions in the user manual to connect the immobiliser. You can also refer to online resources for more information specific to the model of your vehicle.
It is recommended to test the immobiliser following completion of it to make sure it's functioning properly. You can do this by entering the PIN code and then trying to start the vehicle. After this it is recommended to check regularly to ensure that the immobiliser is functioning properly. This will help you identify any problems early so that you can resolve them quickly.